The world No. 1 in crude steel production steel plant, over 70% of the HSS for bar and wire are from us.

YUAN HUI
YUAN HUI
LMM GROUP main products focus on the cold and hot plate & wide strip mill rolls and heavy section mill rolls and big casting & forging pieces.

LMM GROUP Certification

LMM GROUP Service

Summary of work rolls roll replacement and maintenance – rolling mill rolls

LinkedIn
Facebook
Twitter
Pinterest
Reddit

Introduction to rollers

The rolls for rolling mill is the core component of the rolling mill. It is used to support the movement of materials during the rolling process and is directly involved in the rolling process. The quality and condition of the rolls have an important impact on the quality, output and production efficiency of the rolled products.

steel work rolls

Roll replacement steps

1. Check the wear of the rollers: Before replacing the rollers, check the wear of the rollers to determine whether they need to be replaced.

2. Prepare new rolls: Select rolls of appropriate specifications and materials as needed, and prepare the tools and materials required for replacement.

3. Shut down and remove old rolls: Shut down the rolling mill, make sure it is shut down, and then use appropriate tools to remove the old rolls.

4. Install the new roll: Install the new roll on the rolling mill, making sure the installation position is correct and the fixing screws are tight.

5. Adjust the position and pressure of the roll: Adjust the position and pressure of the roll according to the rolling mill parameters to ensure normal operation of the rolling mill.

steel mill rolls for sale

Key points of roll maintenance

1. Regularly check the roll wear: Regularly check the surface condition of the roll and pay attention to the degree of wear to ensure the safe operation of the roll and product quality.

2. Keep the rolls clean: Clean the debris, scale, etc. on the surface of the rolls in time to prevent damage to the rolls.

3. Adjust the cooling water flow of the roll: According to the heating condition of the roll, adjust the cooling water flow to maintain the normal temperature of the roll.

4. Monitor the temperature and vibration of the roll: Use sensors and instruments to monitor the temperature and vibration of the roll to ensure it is within the normal range.

Common problems and solutions

1. Excessive wear of the rollers: If the rollers are found to be severely worn, they should be replaced immediately. At the same time, check whether the rolling parameters are reasonable and optimize the process parameters to reduce wear.

2. Roller rupture or breakage: If a roll rupture or breakage occurs, stop the machine immediately to check the cause. Possible reasons include roll quality problems, insufficient cooling, or external impact. Take appropriate preventive measures based on the cause.

Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Always a pre-production sample before mass production;
Always final Inspection before shipment;
During the epidemic, provide remote detection technical support

Tell us a little about your application and we’ll get back to you to finalize a quotation to meet your needs as quickly as possible.

Rolling mill rolls product

Classification by roll material:

Cast iron mill rolls

  • Alloy indefinite chilled cast iron rolls
  • Alloy chilled cast iron rolls
  • Alloy SG ductile cast iron roll
  • Pearlitic ductile cast iron roll
  • Bainite ductile cast iron roll
  • Centrifugal cast iron roll


Cast steel mill rolls   

  • Alloy cast steel rolls
  • Semi-steel roller
  • Graphite steel rolls
  • High-chromium steel roll
  • High-speed steel roll


Forging mill rolls

Sort by position on the rolling mill:

Work rolls
backup rolls

Intermediate roll

Product advantage

The world No. 1 in crude steel production steel plant, over 70% of the HSS for bar and wire are from us.

LMM high-speed steel rolls have higher steel passing per groove (times) due to their good wear resistance, which saves roll changing time, improves rolling mill operation rate, reduces roll consumption, and improve the overall efficiency of the factory.
Generally, the amount of steel passing in a single groove (times) is 3 to 5 times that of cast iron rolls.

Contact US Now !

We would be happy to help and advise if you have any questions or inquiries.