The world No. 1 in crude steel production steel plant, over 70% of the HSS for bar and wire are from us.

Cemented carbide roller

The cemented carbide composite roll is mainly used on the finishing mill for bar, deformed steel bar and common wire. In this way, we can greatly reduce the frequency of changing groove and roll, thus to reduce the labor intensity and improve the work efficiency. The surface quality and yield shall be improved to a maximrurn degree, which leads to a rernarkable ecornmoic benlefit.

ln accordance with the production line and rolling technology of customers, our products are designed to match one-strand rolling, two-slitting rolling and three-slitting rolling. three-slitting rolling, and four slitting rolling, The cemented carbide composite roll includes K1 finished roller, K2 leder roller,K4 pre-slitting roller.K3 slitting roller with high-speed steel as material. The rolling varieties include wire, bar and deformed steel bar.

How to find a trustworthy Tungsten Carbide Rolls manufacturer
If you want to find a trustworthy Tungsten Carbide Rolls supplier with long-term cooperation, maybe you need to concern about as the following

Previous slide
Next slide

Production Process and Production Facilities

composite rolls

Raw material:

The main raw material is tungsten carbide powder. LMM funded 20,000,000.00 USD, and imported the carbide powder manufacture equipment in 2010.
Tungsten carbide powder is produced by APT, and burning in electric heating rotary calcination furnace, and then come into being blue tungsten oxide, then through burning and producing the tungsten powder.

Screened & Classified:

The tungsten powder is screened by a vibrating screen. And then through the air classification equipment, it is classified into different granularity.

Ball Milling & Mixxing:

Tungsten powder in a certain proportion, adding carbon black and other additives after ball milling and mixing.

High Quality TC Powder:

The tungsten powder with good carbon black is added to the intermediate frequency carbonization furnace. In the end, the WC the powder was milled by the ball milling machine, and the high quality tungsten carbide powder was produced.

Forming Powder:

The WC powder, cobalt powder, and other rare elements are formulated in good proportion. Join the ball mill through the 24 hours of wet grinding, and mixed into the forming powder, then put them into the spray drying tower.

Press & Burning:

Compression molding will be prepared and put the powder into the mold, press molding with a hydraulic press; Put the roughcast into the furnace and burn it into the roll roughcast.

Finish Machine:

Through flat grinding, internal hole grinding, and cylindrical grinding comes into being the product of the ring. Also according to different rolling, different rolling mills, processed into wire grooved roll rings, wire thread roll rings, bar combination rolls, and roll steel.

Recommended applications of grades for carbide roll rings

GradeRecommended applications
LMM08RMaximum hardness, excellent wear resistance in the series. Used in the last 1~2 stands of good high-speed rolling mills for rolling common and hard steel bars.
LMM10RHigher wear resistance. Mode rate impact resistance in the series. Used in the last 1~2 stands of good high-speed finishing rolling mills for rolling common and hard steel bars.
LMM12RHigh wear resistance and corrosion resistance. Used in the last 1~4 stands of finishing mills.
LMM15RModerate wear resistance and impact resistance, good for general purpose. Used in the last 1~4 stands or all stands of finishing mills.
LMM18RGood toughness and thermal crack resistance, good for general purpose. Used in most stands of the finishing mills and the rear stands of common mills.
LMM20RBest for general purposes. Used in the front stands of good rolling mills and in the rear stands of common rolling mills.
LMM25RUsed in the first and second stands of finishing rolling mills and in the stands of pre-finishing rolling mills. For every stand of rolling lines for tow speed rolling low precision and unstable operations.
LMM30RMaximum binder content in LMMR series, good toughness and thermal crack resistance. Used in the stands of pre-finishing rolling mills and for rolling rings for hot rolling of ribbed steel.
LMM32RWith good toughness and impact resistance, used for bar, deformed bar finish stand rolling.
GradeRecommended applications
LMM06HIt possesses the highest hardness and the best wear-resistance among all the varieties of cemented carbide roll rings, thus used for the rolling of common wire and hard wire on the last 1~2 stands of high- speed wire rod finishing mill.
LMM08HIt possesses better wear-resistance and moderate impact-resistance with the hardness second to LMM06H among all the varieties, thus used at the last two stands of high-speed wire rod finishing mill.
LMM10HIt possesses the moderate wear-resistance and impact resistance, thus used at the last 3~4 stands of high-speed wire rod finishing mills.
LMM15HModerate wear resistance and impact resistance, good for general purpose. Used in the last 1~4 stands or all stands of finishing mills
LMM20HBest for general purpose. Used in the front stands of good rolling mills and in the rear stands of common rolling mills.
LMM25HMaximum binder content in LMMH series, good toughness and thermal crack resistance. Used in the stands of pre-finishing rolling mills and for roll rings for hot rolling of ribbed steel.
LMM30HMaximum binder content in LMMH series, good toughness and thermal crack resistance. Used for roll rings for hot rolling of ribbed steel and in the stands of pre-finishing rolling mills.
LMM32HWith good toughness and impact resistance, used for bar, deformed bar finish standing rolling.
GradeRecommended applications
YGR20High wear resistance and corrosion resistance. Used in the last 1~2 stands of finishing mills.
YGR25High wear resistance and corrosion resistance. Used in the last 1~3 stands of finishing mills.
YGR30Good toughness, wear resistance, corrosion resistance and thermal crack resistance. Used in the middle and rear stands of finishing mills.
YGR40Good roughness and thermal crack resistance, good for general purpose. Used in the most stands of the finishing mills and in the rear stands of common mills.
YGR45Good toughness and thermal crack resistance. Used in the front stands of finishing mills.
YGR55Good impact resistance. Used in the stands of pre-finishing rolling mills for hot rolling ribbed steel bars and they can be machined with turning and milling.
YGR60Good impact resistance. Used for hot rolling ribbed steel bars and in the first and second stands of pre-finishing rolling mills.
YGH40TWith good toughness and shock resistance, used for preferably high speed wire rolling machine, rolling small size deformed bar finish stand.
YGH45TWith good toughness and shock resistance, used for general high speed wire or common rolling machine, rolling small size deformed bar finish stand

The Products Are Used In More Than 200 Rolling Production Lines

Our Clients Give The Best Feedback For Our Services

Contact US Now !

We would be happy to help and advise if you have any questions or inquiries.