Rolling Mill Rolls: Gap Calibration & Thermal Compensation
Introduction — Why Rolling Mill Rolls First-Coil Thickness Deviation Matters Roll changing is one of the most routine operations in hot rolling mills, and rolling mill rolls are the most critical consumable components in the process. Yet virtually every shift crew has faced the same frustrating problem: after a new work roll is installed, the […]
Causes of Roller Breakage in Tungsten Carbide Roller Rings of Finishing Mill
Analysis of the Causes of Roller Ring Breakage Steel stacking in finishing mill When steel is piled up, the heat of the rolled piece is transferred to the roller ring of the adjacent frame, causing the roller ring temperature to rise and the thermal stress to concentrate. However, during the accident handling process, the surface […]
Causes of large-area peeling on the surface of Composite high-speed steel Roll
High-speed steel is widely used in the production of hot rolling rolls due to its high hardness, good wear resistance and matching strength and toughness. The manufacture of high-speed steel composite rolls adopts a centrifugal casting production process of three-layer composite three-time casting, which solves the technical problem of strength and chemical composition mismatch between […]
International roller ring grade comparison table
Cemented carbide roll rings, composed of tungsten carbide and binding metal, is one kind of tool material with high hardness and good wear-resistance. In order to make full use of the above advantages of cemented carbide roll rings, the manufacturer of high-speed wire rod shall pay more attention to the following items duringthe course of […]
Table of grades recommended for use in different stands
Grades series Stands of prefinish rolling mills Stands of finish rolling mills Stands for reducing diamenters 1 2 3 4 1 2 3 4 5 6 7 8 9 10 1 2 3 4 ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ ◎ […]
Recommended application of grades for carbide roll rings
Grade Recommended applications LMM08R Maximum hardness, excellent wear resistance in the series. Used in the last 1~2 stands of good high-speed rolling mills for rolling common and hard steel bars. LMM10R Higher wear resistance. Mode rate impact resistance in the series. Used in the last 1~2 stands of good high-speed finishing rolling mills for rolling […]
Cemented carbide roll rings of production process and ribbed groove processing
Whole process supervision of the quality of raw material With over twenty years’ experience on the production of cemented carbide roll rings, LMM has established an inte-grated system including R&D and extraction of powder and production and marketing of alloy. Through our professional service, you can make the correct choice for the material to match […]
Rolling technology of hot-rolled bar and deformed steel bar
In accordance with the production line and rolling technology of customers, our products are designed to match one-strand rolling, two-slitting rolling and three-slitting rolling. three-slitting rolling, andfourslittingrolling, The cemented carbide composite roll includes K1 finished roller, K2 leder roller, K4pre-slitting roller.K3 slitting roller with high-speed steel as material. The rolling varieties include wire,bar and deformed […]
English 
Russian 
Arabic 
Hindi