The world No. 1 in crude steel production steel plant, over 70% of the HSS for bar and wire are from us.

Professional Mill Roll Manufacturer

Hss rolls manufactory

Brand name: LMM GROUP
Packing Details : Wooden box with fumigation or Wooden Fram
Delivery Details: 30~60days or Based on the quantity
Shipping: Sea freight、Land freight、Air freight

LMM have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, EZZ steel etc. We do OEM for Concast and Danieli for a long time

High Speed Steel Rolls(hss rolls)

For the outer layer of rolls, LMM GROUP used a hard, high-speed tool steel with outstanding stability even at high temperatures.


(1) Higher work efficiency
When wear resistance can be markedly improved, users can also benefit from a dramatically improved roll consumption rate. It can also significantly extend intervals between roll replacements.

(2)Lower Roll Cost per Tonne: It is estimated that the useful life of HSS rolls is almost 5-6 times more than that of conventional rolls. Meaning that over all cost of rolls consumed per tonne of finished steel produced is much less.

(3) Higher product yield
Excellent wear resistance at high temperatures stabilizes the roll profile, which contributes to improvement of product yield and product surface quality.

Because of the longer product life of the HSS Rolls, the time required for repetitive changing of roll pass is considerably reduced. This regular change of roll pass consumes a lot of time and results in production loss. In addition to production loss, this also accounts for huge energy loss. In case of re-heating furnaces the heated billets/ ingots are forced to be soaked for a longer duration resulting in waste of energy and higher billet/ingot scaling losses. In case of hot charging designs the mill production team is forced to take the heated billet to the cooling bay, thus wasting thermal energy and making the entire system inefficient and cost extensive.

(4) Zero wastage of raw material: Since the grooves/ passes of the HSS rolls have a greater resistance to wear and tear, the shapes of the grooves are stably maintained. Because of the high swelling factor of the HSS rolls with time the barrel swells in turn reducing the size of the worn out grooves. This is very helpful specially in the rolling of bars and re-bars as it give a better control of input material negative allowances.


(5) Attractive product surface
Because surface roughening from repeated thermal fatigue is controlled, you can make attractive products rolled by rolls with uniform microstructures.

(6) Equipment-friendly rolls
Proprietary combining and jointing techniques which are advanced and diverse, we can design and manufacture rolls that are ideal for your service conditions and impose minimal stress on the equipment.

rolling mill rolls steel roller
mill-rollers-steel

One of the largest enterprises specializing in the production of high-performance high-speed steel rolls series products in China

Present your purchasing needs. We will reply you in 24 hours.

LMM GROUP

Founded in 2007, LMM GROUP mainly produces all kinds of metallurgical rolls for various types of steel, bar, high-speed wire and strip hot and cold plate and strip rolling mills.

The company covers an area of 100,000 square meters, including two complete production lines for cast rolls and forged steel rolls, processing workshops, product research and development centers, testing centers, training centers and office buildings and other supporting facilities. The factory environment is very beautiful.

LMM have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, EZZ steel etc. We do OEM for Concast and Danieli for a long time

Play Video about rolling mill rolls equipment

Get a quote quickly

Our Client Say?

The trial data shows that the ∮370mm high-speed steel roll produced by LMMGROUP has far exceeded the single-groove assessment value of 1,500 tons in the “Roll Ordering Technical Agreement”, and the effect is good.

On September 10, 2015, in the rolling process of the steel rolling mill, the LMMGROUP high-speed steel bar rolling experiment was carried out on the first bar line C12 to four cuts, and C14 three cuts to K1, K2, K3, and K4. According to the trial situation, The average amount of steel passing through LMMGROUP rolling is about 50%-60% of the alloy rolling spoke. The processing difficulty of high-speed steel is low, and the processing cost is lower than that of the alloy rolling wheel. Our factory can achieve normal processing.

LMM GROUP have been supplied to world’s top steel manufacturer :

Australia: Liberty steel/Bluescope steel
Iran: Oxin steel
Italy: JSW steel
United Arab EmiratesEmirates Steel
Egypt:Ezz Steel
Russia:MMK,Mechel, NLMK
Luxembourg:RIVA Group,ArcelorMittal
Turkey: Tosyalı Holding,İçdaş,Erdemir Group
Spain: Liberty Steel Group,CELSA Steel Group
India: tata-steel,SAIL, SPL,Erdemir Group etc. We do OEM for Concast and Danieli for a long time

Pre-Sales Service

* Inquiry and consulting support.

* Planning layout and Design requires machinery

* Welcome visit our Factory.

* The production process and before leaving the factory, all performance indicators are strictly tested, and the professional QC team controls according to the process.

After-Sales Service

* Engineers available to service machinery overseas.

* IN-TIME delivery goods.

* The quality is tracked throughout the process, and the installation and use are guided throughout the process.

* Long-term technical support.

* Stick to the agreement, do not do anything that violates the agreement, stick to the spirit of the contract to the end.

Rolling Mill Roll Manufacturer​

Contact US Now !

We would be happy to help and advise if you have any questions or inquiries.