PRODUCT

Unique advantages of the product:

● The high-speed steel roll material contains high alloy elements such as vanadium, tungsten, chromium, molybdenum, niobium, etc. The types of carbides in the roll structure are mainly MC type and M2C type. Compared with ductile iron rolls and high-nickel-chromium rolls, the single-groove (time) steel passing is higher, which saves roll changing time, improves rolling mill operation rate, reduces roll consumption, reduces production costs, and improves the overall benefit of the factory.
● High-speed steel rolls have good thermal stability, and the roll surface has high hardness and good wear resistance at rolling temperature.
● The high-speed steel roll has good hardenability, and the hardness hardly decreases from the surface of the roll body to the inside of the working layer, thus ensuring that the roll has the same good wear resistance from the outside to the inside.
● During the use of the high-speed steel roll, under good cooling conditions, a thin and dense oxide film is formed on the surface of the roll body. This uniform, thin and dense oxide film can exist for a long time without falling off, making the high-speed steel roll wear-resistant. Sex is significantly improved.
● The high-speed steel roll material has a large expansion coefficient and good thermal conductivity. While the roll wears a small amount of the groove during the rolling process, the hole shape continues to become smaller due to the expansion of the high-speed steel material itself. Therefore, the high-speed steel roll is rolling. During the rolling process, the change of the rolling groove is small, and the consistency of the pass size is maintained for a long time, especially when rolling bars or rebars, it is more conducive to control the negative tolerance of the rolling material.
● Since the core of the centrifugal casting high-speed steel roll is made of alloy ductile iron material, the strength of the roll neck is high.

 

Application of high speed steel roll:

High-speed steel has only been used as a roll material for more than ten years. The reason why high-speed steel rolls are suitable for both plate and strip mills, wire and bar mills, and has achieved remarkable results is that high-speed steel has high The high wear resistance and hardenability, especially the red hardness at high temperature, make high-speed steel more suitable for use as a manufacturing material for rolls. At present, high-speed steel roll series products are widely used in:
● High-speed bar pre-finishing stand, finished product stand, finished product pre-rolling stand, pre-slicing stand, slitting stand of bar rolling mill
● High-speed wire rod mill pre-finishing mill
● Hot rolling narrow and medium wide steel rolling mill finishing line
● Finishing stand of spring flat steel mill and small section steel mills such as angle steel and channel steel

 

Main chemical composition:

Element

C

Si

Mn

Cr

Ni

Proportion(%)

1.5-2.2

0.3-1.0

0.4-1.2

3.0-8.0

0-1.5

Element

Mo

V

W

P

S

Proportion(%)

2.0-8.0

2.0-9.0

0-8.0

≤0.03

≤0.03

 

Effect:

Compared with traditional ductile iron rolls and high-nickel-chromium rolls, high-speed steel rolls have higher steel passing per groove (times) due to their good wear resistance, which saves roll changing time, improves rolling mill operation rate, reduces roll consumption, and reduces production. cost, and improve the overall efficiency of the factory. Generally, the amount of steel passing in a single groove (times) is 3 to 5 times that of cast iron rolls, and the total amount of passing steel can be guaranteed to be more than 4 times on average. The following table shows the use effect of high-speed steel rolls on continuous bar rolling mills:

 

Download

related products

cast iron rolls

cast steel rolls

high speed steel rolls

We can provide characteristic service and differentiated products according to the different conditions of rolling mill.

Service Include

Our Clients Give The Best Feedback

John Doe
John Doe@username
Read More
Although the price of LMMGROUP is 1.22 times that of the current rolling stock, through this trial, the data shows that the amount of steel passing through is more than 1.3 times higher than the current rolling stock, and the rolling groove wear of the off-line rolling is better than the current rolling stock.
John Doe
John Doe@username
Read More
According to the trial situation, The average amount of steel passing through LMMGROUP rolling is about 50%-60% of the alloy rolling spoke. The processing difficulty of high-speed steel is low, and the processing cost is lower than that of the alloy rolling wheel.
Previous
Next

Need For Some Help ?

Professional engineers provide solutions and technical drawings

phone

86(411) 84174804

mail

lmme-business@lmmrolls.com

Got a quote?

Our engineering and technical personnel will provide you with technical support at any time.

Contact US Now !

We would be happy to help and advise if you have any questions or inquiries.